Illuminated Reticle battery installation on your TRACT TORIC 34MM 4-25X50

Battery Installation for TRACT TORIC 4-25X50 Scope : A Complete Guide

When it comes to precision shooting, every detail matters. The TRACT TORIC 4-25X50 scope, renowned for its high-quality optics and rugged durability, offers shooters enhanced performance with an illuminated reticle. This feature can be crucial in low-light conditions, where having the ability to see your target clearly is essential for accuracy. To fully utilize this feature, you’ll need to install a battery that powers the illumination.

Illuminated Reticle battery installation process

In this comprehensive guide, we’ll walk you through the battery installation process for the illuminated reticle of the TRACT TORIC 4-25X50 scope. By following these steps, you’ll ensure a smooth installation and optimal performance from your scope. We’ll also answer frequently asked questions about this process and provide some useful tips for maintaining the illumination system in your scope.

Step-by-Step Guide Battery installation

Step 1: Gather Your Tools

To install the battery, you won’t need much other than your scope and the battery itself, which is a CR2032 coin battery. This is a common battery type that is easily available at most stores or online. The good news is that a CR2032 battery typically comes included with your scope, so you don’t need to buy one separately right away.

Pro Tip: It’s always a good idea to have a few spare CR2032 batteries in your gear, especially if you frequently use the illuminated reticle feature. These batteries are inexpensive and lightweight, so they won’t add much to your pack.

Step 2: Remove the Outer Cap of the Illuminated Rheostat – Reticle battery installation

The illuminated reticle in the TRACT TORIC 4-25X50 scope is powered by the battery, which is housed within the rheostat (the knob used to control the reticle’s illumination level). Begin by threading off the outer cap of the rheostat, which is located on the side of the scope. To do this, turn the cap counterclockwise.

Make sure to handle the cap gently, as you don’t want to damage any of the internal components or cause unnecessary wear on the threads.

Step 3: Insert the Battery – Illuminated Reticle battery installation

Once you’ve removed the cap, you’ll see the battery slot. Take the CR2032 battery from the package and insert it into the slot. Pay attention to the orientation: the positive side of the battery (the side with the “+” symbol) should be facing up. This is a crucial detail to ensure that the reticle illuminates correctly.

Pro Tip: When inserting the battery, be cautious not to bend or damage the contacts inside the battery compartment. These contacts are delicate and essential for the reticle to receive power.

Step 4: Replace and Secure the Cap – Reticle battery installation

After inserting the battery, take the outer cap you removed in Step 2 and thread it back onto the rheostat housing. Hold the housing in place while tightening the cap to ensure that the entire unit remains steady and aligned. Tighten the cap until it is snug, but avoid over-tightening, which could damage the threads or make it difficult to remove the cap in the future.

Step 5: Test the Illumination Settings for the battery installation

Now that the battery is installed, it’s time to test the illuminated reticle. Rotate the rheostat to cycle through the different intensity settings. The TRACT TORIC 4-25X50 scope features 10 distinct intensity levels for the reticle, allowing you to adjust the brightness to match your lighting conditions.

One of the great features of this scope is that it has an “off” setting between each intensity level. This design makes it easy to quickly switch off the illumination without having to rotate through all the brightness settings.

Pro Tip: If the reticle does not illuminate after installing the battery, double-check that the battery is properly seated and that the cap is securely threaded on. If everything is installed correctly and the reticle still does not illuminate, the battery might be dead or the contacts could be damaged.

Frequently Asked Questions (FAQ) About the battery installation

1. What type of battery does the TRACT TORIC 4-25X50 scope use? ( Illuminated Reticle battery installation )

The TRACT TORIC 4-25X50 scope uses a CR2032 coin battery to power its illuminated reticle. This type of battery is widely available and commonly used in many electronics, such as watches and small remote controls.

2. How long does the battery last in the TRACT TORIC 4-25X50 scope? ( Illuminated Reticle battery installation )

The battery life depends on how frequently you use the illuminated reticle and at what intensity level. In general, a CR2032 battery can last several months with intermittent use. To prolong battery life, turn off the illumination when it’s not needed.

3. What should I do if the reticle doesn’t illuminate after installing the battery? ( Illuminated Reticle battery installation )

First, make sure that the battery is correctly oriented with the positive side facing up. Next, check that the battery is fully seated and that the cap is securely threaded on. If the reticle still does not illuminate, the battery may be dead, or the contacts may be damaged. Try replacing the battery with a new one, and if that doesn’t work, consider contacting TRACT Optics for further assistance.

4. Can I leave the battery in the scope when I’m not using it? ( Illuminated Reticle battery installation )

Yes, you can leave the battery in the scope when it’s not in use, but it’s recommended to turn the illumination off to conserve battery life. If you won’t be using the scope for an extended period (several months), it may be a good idea to remove the battery to prevent any potential leakage or corrosion.

5. How do I clean the battery compartment contacts? ( Illuminated Reticle battery installation )

To clean the contacts in the battery compartment, use a soft, dry cloth or a cotton swab. Avoid using any liquid cleaners, as moisture can damage the electronics inside the scope. If the contacts appear corroded, gently wipe them down, but be careful not to apply too much pressure, which couldnd  beor break them.

6. Can I use a rechargeable CR2032 battery?

While rechargeable CR2032 batteries are available, it’s recommended to use standard, non-rechargeable CR2032 batteries in the TRACT TORIC 4-25X50 scope for optimal performance. Rechargeable batteries may not provide the same consistent voltage as non-rechargeable ones, which can affect the reticle’s illumination.

7. Where can I buy replacement CR2032 batteries?

CR2032 batteries are widely available at most electronics stores, hardware stores, and online retailers. TRACT Optics also recommends purchasing high-quality batteries from trusted brands to ensure the best performance and longevity.

8. How do I know when the battery needs to be replaced?

The illumination in the reticle will gradually dim as the battery’s power depletes. If you notice that the reticle is not as bright as it used to be, or if it fails to illuminate at all, it’s time to replace the battery.

9. Will the scope still function without the battery?

Yes, the TRACT TORIC 4-25X50 scope will still function as a high-performance riflescope without the battery. The battery is only needed to power the illuminated reticle. Without the battery, you can still use the scope’s full magnification range and optical features.

10. What happens if I accidentally bend the battery contacts?

If the battery contacts inside the compartment become bent, it could prevent the battery from making a proper connection, which would stop the reticle from illuminating. To fix this, you can try gently bending the contacts back into place with a small tool, like a flathead screwdriver. If the damage is severe, it may require professional repair.

Maintenance Tips for Prolonging Battery Life part of the Reticle battery installation

To get the most out of your TRACT TORIC 4-25X50 scope, regular maintenance is key. Here are some tips to ensure your battery and illumination system function smoothly over time:

  1. Turn Off Illumination When Not in Use: Always switch off the illuminated reticle when you’re not actively shooting. This simple habit can greatly extend battery life.
  2. Store in a Dry Environment: Moisture can affect both the scope’s electronics and the battery. Always store your scope in a dry, controlled environment, especially during the off-season.
  3. Check for Corrosion: Periodically check the battery compartment for signs of corrosion. This is especially important if you use the scope in wet conditions.
  4. Carry Spare Batteries: If you’re going on a long hunt or an extended shooting trip, pack extra CR2032 batteries. A backup battery can save you from missing a critical shot due to a dead reticle.
Battery Installation for TRACT TORIC 4-25X50 Scope : A Complete Guide
Battery Installation for TRACT TORIC 4-25X50 Scope : A Complete Guide

Conclusion for the battery installation process

Installing the battery in your TRACT TORIC 4-25X50 scope is a quick and straightforward process that ensures you can take full advantage of the illuminated reticle feature. By following the steps outlined above and keeping your scope well-maintained, you can enjoy enhanced visibility and accuracy during your shooting sessions. If you have any issues or need further assistance, don’t hesitate to contact TRACT Optics for expert support.

Rifle Scopes
Rifle Scopes

FOLLOW US:  FACEBOOK

Leave a Reply

Your email address will not be published. Required fields are marked *